upgrade bt home hub (v1) from ZZN1AA6.196.bli (speedtouch 7G) to ZZN1AA6.2T2.bli

[fenster]

hello

how to upgrade bt home hub (v1) from ZZN1AA6.196.bli (6.1.x.x) (speedtouch 7G) to ZZN1AA6.2T2.bli (6.2.x.x)?

i tried this but the hub made always a restart

or is it not possible
but the original bt firmware is also a 6.2.x.x

best regards

[moog]

since 2t2 thomson have removed support for 7G variants deliberately to stop people flashing their home hubs, telnet and FTP are also disabled in BT firmware for the same reason. They may be a cure in the future but its going to require reverse engineering of the BLI format or stable JTAG writes both some way off.

[fenster]

hello
thank´s for informationes

is there a open CFE.BIN (bootloader) available ?
i will try to connect via JTAG

best regards
fenster

[moog]

some here including source http://www.broadcom.com/products/com...nloads.php#cfe
also
have a look at this
http://wiki.openwrt.org/OpenWrtDocs
and here
http://www.dslreports.com/forum/r186...DeBrick-Access
and here
http://forums.whirlpool.net.au/forum...m?t=896070&p=1
there is a lot more but these will get you going in the right direction, the last link to whirlpool gives a better jtag lead and software link.

[fenster]

here the JTAG backup cfe.bin

perhaps anyone can change this to BANT-7
or unlock it

http://mitglied.lycos.de/projektshox...7G_need_BANT-7


best regards

[fenster]

hello
i have here a open cfe.bin from a
CANT-A : ST-7G-v6 / DV7213 / TG790 (post #4)

http://mitglied.lycos.de/projektshox...213_TG790_post

i tried to change the line in my
CFE.BIN.BANT-Z_ST7G_need_BANT-7

0001FF60 20 20 50 43 54 4E 41 43 20 20 41 2D 03 02 01 0C

that it would be a CANT-A
but it did not work

what´s the differnece between BANT-7 and CANT-A

any idea what can i do ???

best regards

[moog]

hello
i have here a open cfe.bin from a
CANT-A : ST-7G-v6 / DV7213 / TG790 (post #4)

http://mitglied.lycos.de/projektshox...213_TG790_post

i tried to change the line in my
CFE.BIN.BANT-Z_ST7G_need_BANT-7

0001FF60 20 20 50 43 54 4E 41 43 20 20 41 2D 03 02 01 0C

that it would be a CANT-A
but it did not work

what´s the differnece between BANT-7 and CANT-A

any idea what can i do ???

best regards

Originally Posted by fenster

Bant and cant are different versions of circuit board and typically have different hardware addresses. The 7G is very close to the HH bant Z and 7 have similar addresses but there are differences that become more apparant with later versions of firmware.