#1
|
|||
|
|||
![]()
I upgraded to version 6.6.0.8 of Nero and appeared to have no problems creating DVD and report that creation and verifcation went OK.
Not sure how to interpret log but Nero Log said "Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 9:06:00 PM ahead WinASPI: File 'C ![]() Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12c Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.21 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PIONEER DVD-RW DVR-107D>Version: 1.21 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-107D atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-107D D: CDRom0 LITE-ON DVDRW SOHW-832S E: CDRom1 Generic DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 248MB (254596kB) Memory in use : 51 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.4.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 1:18:51 PM #1 SCSI -1033 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x04 0x01 1:18:51 PM #2 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03B56400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x24 0x00 1:18:53 PM #3 SCSI -1033 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x04 0x01 1:18:55 PM #4 SCSI -1033 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x04 0x01 1:18:57 PM #5 SCSI -1033 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x04 0x01 1:18:59 PM #6 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03B56400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x24 0x00 1:19:42 PM #7 Text 0 File Reader.cpp, Line 127 Reader running 1:19:42 PM #8 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 1:19:43 PM #9 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2078069 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 1:19:43 PM #10 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2078069 = 2078069, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 1:19:43 PM #11 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 1:19:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2078068 (461:47.43, 4058MB) 1:19:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD DVD) 1:19:43 PM #14 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 1:19:43 PM #15 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:19:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2078069 (2078069) = #2078069/461:47.44 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2078069 blocks [Image Recorder] -------------------------------------------------------------- 1:19:43 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4255885312, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2078069 | lead-out | 1 | 0x41 | 0x00 1:19:43 PM #18 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 1:19:43 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:26:38 PM #20 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 2078069 (1FB575h), lenght 0 blocks 1:26:41 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:26:42 PM #22 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 1:27:24 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 1:27:24 PM #2 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-107D running 1:27:24 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4255885312 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=461:47.44 ( 2078069) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <F ![]() 1:27:25 PM #4 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 1:52:42 PM #5 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2078068 (461:47.43, 4058MB) 1:52:42 PM #6 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD DVD) 1:52:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: PIONEER DVD-RW DVR-107D, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 3 1:52:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.) 1:52:43 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2078069 (2078069) = #2078069/461:47.44 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2078069 blocks [PIONEER DVD-RW DVR-107D] -------------------------------------------------------------- 1:52:43 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [PIONEER DVD-RW DVR-107D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4255885312, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2078069 | lead-out | 1 | 0x41 | 0x00 1:52:43 PM #11 Phase 28 File dlgbrnst.cpp, Line 1832 Speed measurement started 1:52:43 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:54:27 PM #13 Text 0 File WriterStatus.cpp, Line 116 <PIONEER DVD-RW DVR-107D> start writing Lead-Out at LBA 2078069 (1FB575h), lenght 0 blocks 1:54:27 PM #14 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:54:27 PM #15 Phase 29 File dlgbrnst.cpp, Line 1781 Speed measurement completed: 29.5x (40,784 KB/s) 1:54:27 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 1:54:27 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:54:27 PM #18 Text 0 File Cdrdrv.cpp, Line 8438 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MBIPG101 Media type ID: R04 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8 23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 1:54:27 PM #19 Text 0 File DVDPlusRW.cpp, Line 648 Start write address at LBA 0 DVD high compatibility mode: Yes 1:54:29 PM #20 Text 0 File Cdrdrv.cpp, Line 1288 13:54:29.345 - PIONEER DVD-RW DVR-107D\H1 T0 : Queue again later . . . . 1:55:08 PM #119 Text 0 File Cdrdrv.cpp, Line 1288 13:55:08.772 - PIONEER DVD-RW DVR-107D\H1 T0 : Queue again later 2:02:01 PM #120 Text 0 File WriterStatus.cpp, Line 116 <PIONEER DVD-RW DVR-107D> start writing Lead-Out at LBA 2078069 (1FB575h), lenght 0 blocks 2:02:01 PM #121 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:02:08 PM #122 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) 2:02:08 PM #123 Phase 78 File dlgbrnst.cpp, Line 1832 Data verification started 2:02:11 PM #124 SCSI -1169 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03B56200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x04 0x07 2:10:46 PM #125 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:10:46 PM #126 Phase 80 File dlgbrnst.cpp, Line 1832 Data verification completed successfully Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 9:06:00 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 02/08/2004 2:03:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 11, 1, size=99456 bytes, created 03/01/2005 11:33:44 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 11, 1, size=28928 bytes, created 03/01/2005 11:33:24 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 11, 1, size=8704 bytes, created 03/01/2005 11:33:46 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) " If I put DVD (I use DVD+R blanks) created from images or copied from other DVDs into either of my PC's DVD drives they are detected as CDs and are not able to be read. If I use DVR+RW I have no problems - PC sees it as a DVD in both drives. Bought DVDs and DVDs that come with magazines are read by both drives. Both drives using Nero have no problems creating CDs. Drives are Panasonic DVR-107D and Lite-on Double Layer DVDRW SOHW-832S I upgraded to Nero V6.6.0.12 and still got same results. Can anyone help - it is costing me a lot in blank DVDs? ![]()
__________________
cheers Gazza |
#2
|
||||
|
||||
![]()
Try using one of the clean up tools to remove all traces of nero then reinstall.
http://www.nero.com/eng/Utilities.html Also you can turn of windows own cd burning software go to control panal / admin tools / services / find IMAPI CD-Burning COM Service and disable it. Have you installed any other cd/dvd burning software |
#3
|
|||
|
|||
![]()
Have you checked to see if there are any firmware updates for your dvd rewriter ?
|
#4
|
|||
|
|||
![]()
Have turned off WinXPs internal burning service. Have upgraded firmware on drives to latest. Have tried writing at all speeds with no success. Have tried four different brand of DVD+R media.
I am going to try uninstall and clean then reinstall. My problems only began when I did first upgrade. I had other burning software prior to that and had no problems.
__________________
cheers Gazza Last edited by GazzaOz; 02-May-2005 at 07:53. |
#5
|
|||
|
|||
![]()
Have fixed problem by removing Nero V6.6.0.12 and reverting to Nero V6.3. No more problems - why???
__________________
cheers Gazza |
![]() |
Tags |
123, 419, files, firmware, key, line, product, security, software, speeds, tools, windows |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Win2003 server and internet connection problem | zillah | Networking | 8 | 29-April-2005 06:00 |
SpeedTouch 330 Problem With Nforce 3 USB Controller | egyteam | Hardware | 5 | 23-February-2005 13:21 |
dun code for windows | stonedtech | Broadband Internet Access | 5 | 26-January-2005 01:35 |
tv capture problem | twofurlongs2go | General Software | 0 | 18-July-2004 16:23 |