|
#1
13-May-2008, 18:03
|
|||
|
|||
ST780WL - No callerID when using PSTN port
Hi!
I have a ST780WL and apart the 2 Voip ports I also connected a landline to the PSTN port. This way it forwards the calls from the landline throught the 2 Voip ports. Now I only need one phone device for all three lines (2 Voip & 1 landline). The problem I have is that when someone is calling me to the landline number I get no callerID. In order to use the 2 Voip lines I have to use specific user.ini and I found that there must be something in it that block CLID. If I do a hard reset the CLID works fine but I don't have the 2 Voip lines. Any ideas how to correct this or at least what I'm looking for in the user.ini? I've tried various firmwares 6.2.17.5, 6.2.29.2 & 7.1.4.7 but no luck. 
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| LinkSys WAG354G and port forwarding | zillah | Broadband Internet Access | 13 | 14-October-2005 13:56 |
| BT Openworld port throttles? | silver | Broadband Internet Access | 17 | 22-July-2003 00:43 |
| Rule Based Firewalls (like Tiny): making f/w rules secure | silver | PC Security | 6 | 26-February-2003 11:11 |
| Question about open ports | squidgy | General Software | 25 | 27-March-2002 15:16 |
| Port Scans, what are they, what do they do, should you be worried? | silver | PC Security | 4 | 25-October-2001 07:35 |
All times are GMT +1. The time now is 14:04.